Home

How to Clean a Protein Shaker After Use

To clean a protein shaker after use, empty it, take apart the removable parts and wash every surface that touches your drink with warm water and dishwashing liquid. Rinse thoroughly, then let the bottle, lid and accessories dry completely before putting them back together. A quick rinse alone won't remove all the protein residue.

How to clean a protein shaker by hand

Wash your shaker as soon as you can after finishing your drink. Protein powder can collect around the base, lid threads and drinking spout, while milk, nut butter and other ingredients can leave a greasy film. You'll need to clean away natural or organic ingredients just as thoroughly as any other food residue.

Use ordinary dishwashing liquid, a soft bottle brush and water warm enough to clean with comfortably by hand. FoodSafety.gov recommends washing utensils with hot, soapy water, but follow your shaker's care instructions if they specify a lower water temperature.

  1. Take apart the removable parts. Remove the lid, mixing ball, mesh insert and any detachable storage compartments. Take out the rubber or silicone sealing ring only if the design allows it.
  2. Rinse away loose residue. Run water through the drinking spout and rinse both sides of the lid before you start scrubbing.
  3. Wash the bottle thoroughly. Add dishwashing liquid and warm water, then brush the base, inner walls, curved area near the neck and screw threads.
  4. Clean the small parts separately. Use a small, soft brush around the spout, flip-cap hinge and seal groove. Wash between the wires of the mixing ball and through the mesh openings.
  5. Rinse every part. Keep rinsing until you can't see any foam or feel a slippery detergent film, including inside the spout and beneath the seal.

Shaking soapy water inside the closed bottle can loosen residue, but it doesn't replace brushing. Avoid steel wool, abrasive powders and sharp tools, which can scratch plastic or damage the seal.

How to dry your protein shaker before storing it

Dry every part completely before putting your shaker away. Place the pieces separately on a clean drying rack, with enough space for air to circulate. Angle the bottle so water drains out without its opening resting flat against a surface.

Check the seal groove, cap hinge and storage compartments for trapped droplets. If you need the shaker straight away, dry the surfaces you can reach with a clean, dry cloth and check that no fibres have caught around the seal.

Store the bottle with its lid off and resting beside it. If you close a damp shaker, you'll trap moisture inside, which can leave a musty smell even after washing. Clean your bottle brush and drying rack regularly too, so you don't put freshly washed parts on a dirty surface.

Can you put a protein shaker in the dishwasher?

Use a dishwasher only if the manufacturer marks the parts you want to wash as dishwasher-safe. Check each part separately: you may be able to put the bottle in the dishwasher but need to handwash its lid, seal, insulated sections or any parts with printed markings.

Follow the manufacturer's instructions for rack position and temperature. Secure small accessories in a dishwasher basket so they can't fall towards the heating element. Position the bottle so water can reach inside and drain out.

Scrape or rinse out thick residue first, and inspect the lid after the cycle. Your dishwasher may not remove deposits trapped beneath a removable seal. Don't pour boiling water into a plastic shaker or select a high-heat cycle unless its care instructions specifically allow it.

How to remove a lingering smell from your protein shaker

If your shaker still smells after washing, take it apart again and inspect the hidden surfaces. You can easily miss a thin layer of old shake beneath the sealing ring or inside the spout. Clean these areas before trying to remove the smell from the bottle.

If an otherwise clean bottle still smells, check whether the manufacturer allows you to soak it in a bicarbonate of soda solution. If it does, add a small amount to warm water, leave the bottle open while it soaks, then wash and rinse it again. Bicarbonate of soda may help remove odours, but it isn't a disinfectant.

Don't use perfume, essential oils or strongly fragranced cleaners to cover the smell. Never mix cleaning products, especially bleach with vinegar or other acids. If the odour persists despite thorough cleaning and drying, replace the affected part rather than repeatedly masking it.

What to do if you can't wash your shaker straight away

Empty any leftover shake promptly, rinse the bottle and lid with drinking-quality water, and drain them well. This quick rinse makes washing easier later, but you'll still need to wash the shaker before making another drink.

If you need to carry it in your bag, keep it empty and close it only for transport. Open and wash it when you reach a suitable sink. Don't add fresh powder to old residue or leave leftover shake inside to put off cleaning it.

When should you replace your protein shaker?

Replace damaged parts if you notice deep scratches, cracks, a warped lid, a split seal or a seal that stays sticky after washing. This damage can make thorough cleaning difficult or cause leaks. You may only need a replacement seal if the rest of your shaker is intact.

If you see mould, stop using your shaker and take it apart to inspect it. Replace porous or damaged parts and any part where you can't fully reach and remove the mould. If you use an electric shaker, keep the motor base out of water and follow the manufacturer's cleaning instructions. Immerse only the parts designed to go in water.

Sources